Linux
Application
Development

Michael K. Johnson
Erik W. Troan

The GNU Binary Utilities

Version 2.8.1

May 1993

Roland H. Pesch
Jeffrey M. Osier
Cygnus Support


Table of Contents


ar

ar [-]p[mod [relpos]] archive [member...]
ar -M [ <mri-script ]

The GNU ar program creates, modifies, and extracts from archives. An archive is a single file holding a collection of other files in a structure that makes it possible to retrieve the original individual files (called members of the archive).

The original files' contents, mode (permissions), timestamp, owner, and group are preserved in the archive, and can be restored on extraction.

GNU ar can maintain archives whose members have names of any length; however, depending on how ar is configured on your system, a limit on member-name length may be imposed for compatibility with archive formats maintained with other tools. If it exists, the limit is often 15 characters (typical of formats related to a.out) or 16 characters (typical of formats related to coff).

ar is considered a binary utility because archives of this sort are most often used as libraries holding commonly needed subroutines.

ar creates an index to the symbols defined in relocatable object modules in the archive when you specify the modifier `s'. Once created, this index is updated in the archive whenever ar makes a change to its contents (save for the `q' update operation). An archive with such an index speeds up linking to the library, and allows routines in the library to call each other without regard to their placement in the archive.

You may use `nm -s' or `nm --print-armap' to list this index table. If an archive lacks the table, another form of ar called ranlib can be used to add just the table.

GNU ar is designed to be compatible with two different facilities. You can control its activity using command-line options, like the different varieties of ar on Unix systems; or, if you specify the single command-line option `-M', you can control it with a script supplied via standard input, like the MRI "librarian" program.

Controlling ar on the command line

ar [-]p[mod [relpos]] archive [member...]

When you use ar in the Unix style, ar insists on at least two arguments to execute: one keyletter specifying the operation (optionally accompanied by other keyletters specifying modifiers), and the archive name to act on.

Most operations can also accept further member arguments, specifying particular files to operate on.

GNU ar allows you to mix the operation code p and modifier flags mod in any order, within the first command-line argument.

If you wish, you may begin the first command-line argument with a dash.

The p keyletter specifies what operation to execute; it may be any of the following, but you must specify only one of them:

d
Delete modules from the archive. Specify the names of modules to be deleted as member...; the archive is untouched if you specify no files to delete. If you specify the `v' modifier, ar lists each module as it is deleted.
m
Use this operation to move members in an archive. The ordering of members in an archive can make a difference in how programs are linked using the library, if a symbol is defined in more than one member. If no modifiers are used with m, any members you name in the member arguments are moved to the end of the archive; you can use the `a', `b', or `i' modifiers to move them to a specified place instead.
p
Print the specified members of the archive, to the standard output file. If the `v' modifier is specified, show the member name before copying its contents to standard output. If you specify no member arguments, all the files in the archive are printed.
q
Quick append; add the files member... to the end of archive, without checking for replacement. The modifiers `a', `b', and `i' do not affect this operation; new members are always placed at the end of the archive. The modifier `v' makes ar list each file as it is appended. Since the point of this operation is speed, the archive's symbol table index is not updated, even if it already existed; you can use `ar s' or ranlib explicitly to update the symbol table index.
r
Insert the files member... into archive (with replacement). This operation differs from `q' in that any previously existing members are deleted if their names match those being added. If one of the files named in member... does not exist, ar displays an error message, and leaves undisturbed any existing members of the archive matching that name. By default, new members are added at the end of the file; but you may use one of the modifiers `a', `b', or `i' to request placement relative to some existing member. The modifier `v' used with this operation elicits a line of output for each file inserted, along with one of the letters `a' or `r' to indicate whether the file was appended (no old member deleted) or replaced.
t
Display a table listing the contents of archive, or those of the files listed in member... that are present in the archive. Normally only the member name is shown; if you also want to see the modes (permissions), timestamp, owner, group, and size, you can request that by also specifying the `v' modifier. If you do not specify a member, all files in the archive are listed. If there is more than one file with the same name (say, `fie') in an archive (say `b.a'), `ar t b.a fie' lists only the first instance; to see them all, you must ask for a complete listing--in our example, `ar t b.a'.
x
Extract members (named member) from the archive. You can use the `v' modifier with this operation, to request that ar list each name as it extracts it. If you do not specify a member, all files in the archive are extracted.

A number of modifiers (mod) may immediately follow the p keyletter, to specify variations on an operation's behavior:

a
Add new files after an existing member of the archive. If you use the modifier `a', the name of an existing archive member must be present as the relpos argument, before the archive specification.
b
Add new files before an existing member of the archive. If you use the modifier `b', the name of an existing archive member must be present as the relpos argument, before the archive specification. (same as `i').
c
Create the archive. The specified archive is always created if it did not exist, when you request an update. But a warning is issued unless you specify in advance that you expect to create it, by using this modifier.
f
Truncate names in the archive. GNU ar will normally permit file names of any length. This will cause it to create archives which are not compatible with the native ar program on some systems. If this is a concern, the `f' modifier may be used to truncate file names when putting them in the archive.
i
Insert new files before an existing member of the archive. If you use the modifier `i', the name of an existing archive member must be present as the relpos argument, before the archive specification. (same as `b').
l
This modifier is accepted but not used.
o
Preserve the original dates of members when extracting them. If you do not specify this modifier, files extracted from the archive are stamped with the time of extraction.
s
Write an object-file index into the archive, or update an existing one, even if no other change is made to the archive. You may use this modifier flag either with any operation, or alone. Running `ar s' on an archive is equivalent to running `ranlib' on it.
u
Normally, `ar r'... inserts all files listed into the archive. If you would like to insert only those of the files you list that are newer than existing members of the same names, use this modifier. The `u' modifier is allowed only for the operation `r' (replace). In particular, the combination `qu' is not allowed, since checking the timestamps would lose any speed advantage from the operation `q'.
v
This modifier requests the verbose version of an operation. Many operations display additional information, such as filenames processed, when the modifier `v' is appended.
V
This modifier shows the version number of ar.

Controlling ar with a script

ar -M [ <script ]

If you use the single command-line option `-M' with ar, you can control its operation with a rudimentary command language. This form of ar operates interactively if standard input is coming directly from a terminal. During interactive use, ar prompts for input (the prompt is `AR >'), and continues executing even after errors. If you redirect standard input to a script file, no prompts are issued, and ar abandons execution (with a nonzero exit code) on any error.

The ar command language is not designed to be equivalent to the command-line options; in fact, it provides somewhat less control over archives. The only purpose of the command language is to ease the transition to GNU ar for developers who already have scripts written for the MRI "librarian" program.

The syntax for the ar command language is straightforward:

Here are the commands you can use in ar scripts, or when using ar interactively. Three of them have special significance:

OPEN or CREATE specify a current archive, which is a temporary file required for most of the other commands.

SAVE commits the changes so far specified by the script. Prior to SAVE, commands affect only the temporary copy of the current archive.

ADDLIB archive
ADDLIB archive (module, module, ... module)
Add all the contents of archive (or, if specified, each named module from archive) to the current archive. Requires prior use of OPEN or CREATE.
ADDMOD member, member, ... member
Add each named member as a module in the current archive. Requires prior use of OPEN or CREATE.
CLEAR
Discard the contents of the current archive, cancelling the effect of any operations since the last SAVE. May be executed (with no effect) even if no current archive is specified.
CREATE archive
Creates an archive, and makes it the current archive (required for many other commands). The new archive is created with a temporary name; it is not actually saved as archive until you use SAVE. You can overwrite existing archives; similarly, the contents of any existing file named archive will not be destroyed until SAVE.
DELETE module, module, ... module
Delete each listed module from the current archive; equivalent to `ar -d archive module ... module'. Requires prior use of OPEN or CREATE.
DIRECTORY archive (module, ... module)
DIRECTORY archive (module, ... module) outputfile
List each named module present in archive. The separate command VERBOSE specifies the form of the output: when verbose output is off, output is like that of `ar -t archive module...'. When verbose output is on, the listing is like `ar -tv archive module...'. Output normally goes to the standard output stream; however, if you specify outputfile as a final argument, ar directs the output to that file.
END
Exit from ar, with a 0 exit code to indicate successful completion. This command does not save the output file; if you have changed the current archive since the last SAVE command, those changes are lost.
EXTRACT module, module, ... module
Extract each named module from the current archive, writing them into the current directory as separate files. Equivalent to `ar -x archive module...'. Requires prior use of OPEN or CREATE.
LIST
Display full contents of the current archive, in "verbose" style regardless of the state of VERBOSE. The effect is like `ar tv archive'). (This single command is a GNU ld enhancement, rather than present for MRI compatibility.) Requires prior use of OPEN or CREATE.
OPEN archive
Opens an existing archive for use as the current archive (required for many other commands). Any changes as the result of subsequent commands will not actually affect archive until you next use SAVE.
REPLACE module, module, ... module
In the current archive, replace each existing module (named in the REPLACE arguments) from files in the current working directory. To execute this command without errors, both the file, and the module in the current archive, must exist. Requires prior use of OPEN or CREATE.
VERBOSE
Toggle an internal flag governing the output from DIRECTORY. When the flag is on, DIRECTORY output matches output from `ar -tv '....
SAVE
Commit your changes to the current archive, and actually save it as a file with the name specified in the last CREATE or OPEN command. Requires prior use of OPEN or CREATE.

ld

The GNU linker ld is now described in a separate manual. See section `Overview' in Using LD: the GNU linker.

nm

nm [ -a | --debug-syms ]  [ -g | --extern-only ]
   [ -B ]  [ -C | --demangle ] [ -D | --dynamic ]
   [ -s | --print-armap ]  [ -A | -o | --print-file-name ]
   [ -n | -v | --numeric-sort ]  [ -p | --no-sort ]
   [ -r | --reverse-sort ]  [ --size-sort ] [ -u | --undefined-only ]
   [ -t radix | --radix=radix ] [ -P | --portability ]
   [ --target=bfdname ] [ -f format | --format=format ]
   [ --defined-only ] [-l | --line-numbers ]
   [ --no-demangle ] [ -V | --version ]  [ --help ]  [ objfile... ]

GNU nm lists the symbols from object files objfile.... If no object files are listed as arguments, nm assumes `a.out'.

For each symbol, nm shows:

The long and short forms of options, shown here as alternatives, are equivalent.

-A
-o
--print-file-name
Precede each symbol by the name of the input file (or archive element) in which it was found, rather than identifying the input file once only, before all of its symbols.
-a
--debug-syms
Display all symbols, even debugger-only symbols; normally these are not listed.
-B
The same as `--format=bsd' (for compatibility with the MIPS nm).
-C
--demangle
Decode (demangle) low-level symbol names into user-level names. Besides removing any initial underscore prepended by the system, this makes C++ function names readable. See section c++filt, for more information on demangling.
--no-demangle
Do not demangle low-level symbol names. This is the default.
-D
--dynamic
Display the dynamic symbols rather than the normal symbols. This is only meaningful for dynamic objects, such as certain types of shared libraries.
-f format
--format=format
Use the output format format, which can be bsd, sysv, or posix. The default is bsd. Only the first character of format is significant; it can be either upper or lower case.
-g
--extern-only
Display only external symbols.
-l
--line-numbers
For each symbol, use debugging information to try to find a filename and line number. For a defined symbol, look for the line number of the address of the symbol. For an undefined symbol, look for the line number of a relocation entry which refers to the symbol. If line number information can be found, print it after the other symbol information.
-n
-v
--numeric-sort
Sort symbols numerically by their addresses, rather than alphabetically by their names.
-p
--no-sort
Do not bother to sort the symbols in any order; print them in the order encountered.
-P
--portability
Use the POSIX.2 standard output format instead of the default format. Equivalent to `-f posix'.
-s
--print-armap
When listing symbols from archive members, include the index: a mapping (stored in the archive by ar or ranlib) of which modules contain definitions for which names.
-r
--reverse-sort
Reverse the order of the sort (whether numeric or alphabetic); let the last come first.
--size-sort
Sort symbols by size. The size is computed as the difference between the value of the symbol and the value of the symbol with the next higher value. The size of the symbol is printed, rather than the value.
-t radix
--radix=radix
Use radix as the radix for printing the symbol values. It must be `d' for decimal, `o' for octal, or `x' for hexadecimal.
--target=bfdname
Specify an object code format other than your system's default format. See section Target Selection, for more information.
-u
--undefined-only
Display only undefined symbols (those external to each object file).
--defined-only
Display only defined symbols for each object file.
-V
--version
Show the version number of nm and exit.
--help
Show a summary of the options to nm and exit.

objcopy

objcopy [ -F bfdname | --target=bfdname ]
        [ -I bfdname | --input-target=bfdname ]
        [ -O bfdname | --output-target=bfdname ]
        [ -S | --strip-all ]  [ -g | --strip-debug ]
        [ -K symbolname | --keep-symbol=symbolname ]
        [ -N symbolname | --strip-symbol=symbolname ]
        [ -x | --discard-all ]  [ -X | --discard-locals ]
        [ -b byte | --byte=byte ]
        [ -i interleave | --interleave=interleave ]
        [ -R sectionname | --remove-section=sectionname ]
        [ -p | --preserve-dates ] [ --debugging ]
        [ --gap-fill=val ] [ --pad-to=address ]
        [ --set-start=val ] [ --adjust-start=incr ]
        [ --adjust-vma=incr ]
        [ --adjust-section-vma=section{=,+,-}val ]
        [ --adjust-warnings ] [ --no-adjust-warnings ]
        [ --set-section-flags=section=flags ]
        [ --add-section=sectionname=filename ]
        [ --change-leading-char ] [ --remove-leading-char ]
        [ --weaken ]
        [ -v | --verbose ] [ -V | --version ]  [ --help ]
        infile [outfile]

The GNU objcopy utility copies the contents of an object file to another. objcopy uses the GNU BFD Library to read and write the object files. It can write the destination object file in a format different from that of the source object file. The exact behavior of objcopy is controlled by command-line options.

objcopy creates temporary files to do its translations and deletes them afterward. objcopy uses BFD to do all its translation work; it has access to all the formats described in BFD and thus is able to recognize most formats without being told explicitly. See section `BFD' in Using LD.

objcopy can be used to generate S-records by using an output target of `srec' (e.g., use `-O srec').

objcopy can be used to generate a raw binary file by using an output target of `binary' (e.g., use `-O binary'). When objcopy generates a raw binary file, it will essentially produce a memory dump of the contents of the input object file. All symbols and relocation information will be discarded. The memory dump will start at the load address of the lowest section copied into the output file.

When generating an S-record or a raw binary file, it may be helpful to use `-S' to remove sections containing debugging information. In some cases `-R' will be useful to remove sections which contain information which is not needed by the binary file.

infile
outfile
The source and output files, respectively. If you do not specify outfile, objcopy creates a temporary file and destructively renames the result with the name of infile.
-I bfdname
--input-target=bfdname
Consider the source file's object format to be bfdname, rather than attempting to deduce it. See section Target Selection, for more information.
-O bfdname
--output-target=bfdname
Write the output file using the object format bfdname. See section Target Selection, for more information.
-F bfdname
--target=bfdname
Use bfdname as the object format for both the input and the output file; i.e., simply transfer data from source to destination with no translation. See section Target Selection, for more information.
-R sectionname
--remove-section=sectionname
Remove any section named sectionname from the output file. This option may be given more than once. Note that using this option inappropriately may make the output file unusable.
-S
--strip-all
Do not copy relocation and symbol information from the source file.
-g
--strip-debug
Do not copy debugging symbols from the source file.
--strip-unneeded
Strip all symbols that are not needed for relocation processing.
-K symbolname
--keep-symbol=symbolname
Copy only symbol symbolname from the source file. This option may be given more than once.
-N symbolname
--strip-symbol=symbolname
Do not copy symbol symbolname from the source file. This option may be given more than once, and may be combined with strip options other than -K.
-x
--discard-all
Do not copy non-global symbols from the source file.
-X
--discard-locals
Do not copy compiler-generated local symbols. (These usually start with `L' or `.'.)
-b byte
--byte=byte
Keep only every byteth byte of the input file (header data is not affected). byte can be in the range from 0 to interleave-1, where interleave is given by the `-i' or `--interleave' option, or the default of 4. This option is useful for creating files to program ROM. It is typically used with an srec output target.
-i interleave
--interleave=interleave
Only copy one out of every interleave bytes. Select which byte to copy with the -b or `--byte' option. The default is 4. objcopy ignores this option if you do not specify either `-b' or `--byte'.
-p
--preserve-dates
Set the access and modification dates of the output file to be the same as those of the input file.
--debugging
Convert debugging information, if possible. This is not the default because only certain debugging formats are supported, and the conversion process can be time consuming.
--gap-fill val
Fill gaps between sections with val. This is done by increasing the size of the section with the lower address, and filling in the extra space created with val.
--pad-to address
Pad the output file up to the virtual address address. This is done by increasing the size of the last section. The extra space is filled in with the value specified by `--gap-fill' (default zero).
--set-start val
Set the address of the new file to val. Not all object file formats support setting the start address.
--adjust-start incr
Adjust the start address by adding incr. Not all object file formats support setting the start address.
--adjust-vma incr
Adjust the address of all sections, as well as the start address, by adding incr. Some object file formats do not permit section addresses to be changed arbitrarily. Note that this does not relocate the sections; if the program expects sections to be loaded at a certain address, and this option is used to change the sections such that they are loaded at a different address, the program may fail.
--adjust-section-vma section{=,+,-}val
Set or adjust the address of the named section. If `=' is used, the section address is set to val. Otherwise, val is added to or subtracted from the section address. See the comments under `--adjust-vma', above. If section does not exist in the input file, a warning will be issued, unless `--no-adjust-warnings' is used.
--adjust-warnings
If `--adjust-section-vma' is used, and the named section does not exist, issue a warning. This is the default.
--no-adjust-warnings
Do not issue a warning if `--adjust-section-vma' is used, even if the named section does not exist.
--set-section-flags section=flags
Set the flags for the named section. The flags argument is a comma separated string of flag names. The recognized names are `alloc', `load', `readonly', `code', `data', and `rom'. Not all flags are meaningful for all object file formats.
--add-section sectionname=filename
Add a new section named sectionname while copying the file. The contents of the new section are taken from the file filename. The size of the section will be the size of the file. This option only works on file formats which can support sections with arbitrary names.
--change-leading-char
Some object file formats use special characters at the start of symbols. The most common such character is underscore, which compilers often add before every symbol. This option tells objcopy to change the leading character of every symbol when it converts between object file formats. If the object file formats use the same leading character, this option has no effect. Otherwise, it will add a character, or remove a character, or change a character, as appropriate.
--remove-leading-char
If the first character of a global symbol is a special symbol leading character used by the object file format, remove the character. The most common symbol leading character is underscore. This option will remove a leading underscore from all global symbols. This can be useful if you want to link together objects of different file formats with different conventions for symbol names. This is different from --change-leading-char because it always changes the symbol name when appropriate, regardless of the object file format of the output file.
--weaken
Change all global symbols in the file to be weak. This can be useful when building an object which will be linked against other objects using the -R option to the linker. This option is only effective when using an object file format which supports weak symbols.
-V
--version
Show the version number of objcopy.
-v
--verbose
Verbose output: list all object files modified. In the case of archives, `objcopy -V' lists all members of the archive.
--help
Show a summary of the options to objcopy.

objdump

objdump [ -a | --archive-headers ] 
        [ -b bfdname | --target=bfdname ] [ --debugging ]
        [ -C | --demangle ] [ -d | --disassemble ]
        [ -D | --disassemble-all ] [ --disassemble-zeroes ]
        [ -EB | -EL | --endian={big | little } ]
        [ -f | --file-headers ]
        [ -h | --section-headers | --headers ]  [ -i | --info ]
        [ -j section | --section=section ]
        [ -l | --line-numbers ] [ -S | --source ]
        [ -m machine | --architecture=machine ]
        [ -r | --reloc ] [ -R | --dynamic-reloc ]
        [ -s | --full-contents ]  [ --stabs ]
        [ -t | --syms ] [ -T | --dynamic-syms ] [ -x | --all-headers ]
        [ -w | --wide ] [ --start-address=address ]
        [ --stop-address=address ]
        [ --prefix-addresses] [ --[no-]show-raw-insn ]
        [ --adjust-vma=offset ]
        [ --version ]  [ --help ]
        objfile...

objdump displays information about one or more object files. The options control what particular information to display. This information is mostly useful to programmers who are working on the compilation tools, as opposed to programmers who just want their program to compile and work.

objfile... are the object files to be examined. When you specify archives, objdump shows information on each of the member object files.

The long and short forms of options, shown here as alternatives, are equivalent. At least one option besides `-l' must be given.

-a
--archive-header
If any of the objfile files are archives, display the archive header information (in a format similar to `ls -l'). Besides the information you could list with `ar tv', `objdump -a' shows the object file format of each archive member.
--adjust-vma=offset
When dumping information, first add offset to all the section addresses. This is useful if the section addresses do not correspond to the symbol table, which can happen when putting sections at particular addresses when using a format which can not represent section addresses, such as a.out.
-b bfdname
--target=bfdname
Specify that the object-code format for the object files is bfdname. This option may not be necessary; objdump can automatically recognize many formats. For example,
objdump -b oasys -m vax -h fu.o
displays summary information from the section headers (`-h') of `fu.o', which is explicitly identified (`-m') as a VAX object file in the format produced by Oasys compilers. You can list the formats available with the `-i' option. See section Target Selection, for more information.
-C
--demangle
Decode (demangle) low-level symbol names into user-level names. Besides removing any initial underscore prepended by the system, this makes C++ function names readable. See section c++filt, for more information on demangling.
--debugging
Display debugging information. This attempts to parse debugging information stored in the file and print it out using a C like syntax. Only certain types of debugging information have been implemented.
-d
--disassemble
Display the assembler mnemonics for the machine instructions from objfile. This option only disassembles those sections which are expected to contain instructions.
-D
--disassemble-all
Like `-d', but disassemble the contents of all sections, not just those expected to contain instructions.
--prefix-addresses
When disassembling, print the complete address on each line. This is the older disassembly format.
--disassemble-zeroes
Normally the disassembly output will skip blocks of zeroes. This option directs the disassembler to disassemble those blocks, just like any other data.
-EB
-EL
--endian={big|little}
Specify the endianness of the object files. This only affects disassembly. This can be useful when disassembling a file format which does not describe endianness information, such as S-records.
-f
--file-header
Display summary information from the overall header of each of the objfile files.
-h
--section-header
--header
Display summary information from the section headers of the object file. File segments may be relocated to nonstandard addresses, for example by using the `-Ttext', `-Tdata', or `-Tbss' options to ld. However, some object file formats, such as a.out, do not store the starting address of the file segments. In those situations, although ld relocates the sections correctly, using `objdump -h' to list the file section headers cannot show the correct addresses. Instead, it shows the usual addresses, which are implicit for the target.
--help
Print a summary of the options to objdump and exit.
-i
--info
Display a list showing all architectures and object formats available for specification with `-b' or `-m'.
-j name
--section=name
Display information only for section name.
-l
--line-numbers
Label the display (using debugging information) with the filename and source line numbers corresponding to the object code or relocs shown. Only useful with `-d', `-D', or `-r'.
-m machine
--architecture=machine
Specify the architecture to use when disassembling object files. This can be useful when disasembling object files which do not describe architecture information, such as S-records. You can list the available architectures with the `-i' option.
-r
--reloc
Print the relocation entries of the file. If used with `-d' or `-D', the relocations are printed interspersed with the disassembly.
-R
--dynamic-reloc
Print the dynamic relocation entries of the file. This is only meaningful for dynamic objects, such as certain types of shared libraries.
-s
--full-contents
Display the full contents of any sections requested.
-S
--source
Display source code intermixed with disassembly, if possible. Implies `-d'.
--show-raw-insn
When disassembling instructions, print the instruction in hex as well as in symbolic form. This is the default except when --prefix-addresses is used.
--no-show-raw-insn
When disassembling instructions, do not print the instruction bytes. This is the default when --prefix-addresses is used.
--stabs
Display the full contents of any sections requested. Display the contents of the .stab and .stab.index and .stab.excl sections from an ELF file. This is only useful on systems (such as Solaris 2.0) in which .stab debugging symbol-table entries are carried in an ELF section. In most other file formats, debugging symbol-table entries are interleaved with linkage symbols, and are visible in the `--syms' output. For more information on stabs symbols, see section `Stabs Overview' in The "stabs" debug format.
--start-address=address
Start displaying data at the specified address. This affects the output of the -d, -r and -s options.
--stop-address=address
Stop displaying data at the specified address. This affects the output of the -d, -r and -s options.
-t
--syms
Print the symbol table entries of the file. This is similar to the information provided by the `nm' program.
-T
--dynamic-syms
Print the dynamic symbol table entries of the file. This is only meaningful for dynamic objects, such as certain types of shared libraries. This is similar to the information provided by the `nm' program when given the `-D' (`--dynamic') option.
--version
Print the version number of objdump and exit.
-x
--all-header
Display all available header information, including the symbol table and relocation entries. Using `-x' is equivalent to specifying all of `-a -f -h -r -t'.
-w
--wide
Format some lines for output devices that have more than 80 columns.

ranlib

ranlib [-vV] archive

ranlib generates an index to the contents of an archive and stores it in the archive. The index lists each symbol defined by a member of an archive that is a relocatable object file.

You may use `nm -s' or `nm --print-armap' to list this index.

An archive with such an index speeds up linking to the library and allows routines in the library to call each other without regard to their placement in the archive.

The GNU ranlib program is another form of GNU ar; running ranlib is completely equivalent to executing `ar -s'. See section ar.

-v
-V
Show the version number of ranlib.

size

size [ -A | -B | --format=compatibility ]
     [ --help ]  [ -d | -o | -x | --radix=number ]
     [ --target=bfdname ]  [ -V | --version ]  
     objfile...

The GNU size utility lists the section sizes--and the total size--for each of the object or archive files objfile in its argument list. By default, one line of output is generated for each object file or each module in an archive.

objfile... are the object files to be examined.

The command line options have the following meanings:

-A
-B
--format=compatibility
Using one of these options, you can choose whether the output from GNU size resembles output from System V size (using `-A', or `--format=sysv'), or Berkeley size (using `-B', or `--format=berkeley'). The default is the one-line format similar to Berkeley's. Here is an example of the Berkeley (default) format of output from size:
size --format=Berkeley ranlib size
text    data    bss     dec     hex     filename
294880  81920   11592   388392  5ed28   ranlib
294880  81920   11888   388688  5ee50   size
This is the same data, but displayed closer to System V conventions:
size --format=SysV ranlib size
ranlib  :
section         size         addr
.text         294880         8192       
.data          81920       303104       
.bss           11592       385024       
Total         388392    

size  :
section         size         addr
.text         294880         8192       
.data          81920       303104       
.bss           11888       385024       
Total         388688    
--help
Show a summary of acceptable arguments and options.
-d
-o
-x
--radix=number
Using one of these options, you can control whether the size of each section is given in decimal (`-d', or `--radix=10'); octal (`-o', or `--radix=8'); or hexadecimal (`-x', or `--radix=16'). In `--radix=number', only the three values (8, 10, 16) are supported. The total size is always given in two radices; decimal and hexadecimal for `-d' or `-x' output, or octal and hexadecimal if you're using `-o'.
--target=bfdname
Specify that the object-code format for objfile is bfdname. This option may not be necessary; size can automatically recognize many formats. See section Target Selection, for more information.
-V
--version
Display the version number of size.

strings

strings [-afov] [-min-len] [-n min-len] [-t radix] [-]
        [--all] [--print-file-name] [--bytes=min-len]
        [--radix=radix] [--target=bfdname]
        [--help] [--version] file...

For each file given, GNU strings prints the printable character sequences that are at least 4 characters long (or the number given with the options below) and are followed by an unprintable character. By default, it only prints the strings from the initialized and loaded sections of object files; for other types of files, it prints the strings from the whole file.

strings is mainly useful for determining the contents of non-text files.

-a
--all
-
Do not scan only the initialized and loaded sections of object files; scan the whole files.
-f
--print-file-name
Print the name of the file before each string.
--help
Print a summary of the program usage on the standard output and exit.
-min-len
-n min-len
--bytes=min-len
Print sequences of characters that are at least min-len characters long, instead of the default 4.
-o
Like `-t o'. Some other versions of strings have `-o' act like `-t d' instead. Since we can not be compatible with both ways, we simply chose one.
-t radix
--radix=radix
Print the offset within the file before each string. The single character argument specifies the radix of the offset---`o' for octal, `x' for hexadecimal, or `d' for decimal.
--target=bfdname
Specify an object code format other than your system's default format. See section Target Selection, for more information.
-v
--version
Print the program version number on the standard output and exit.

strip

strip [ -F bfdname | --target=bfdname | --target=bfdname ]
      [ -I bfdname | --input-target=bfdname ]
      [ -O bfdname | --output-target=bfdname ]
      [ -s | --strip-all ] [ -S | -g | --strip-debug ]
      [ -K symbolname | --keep-symbol=symbolname ]
      [ -N symbolname | --strip-symbol=symbolname ]
      [ -x | --discard-all ] [ -X | --discard-locals ]
      [ -R sectionname | --remove-section=sectionname ]
      [ -o file ] [ -p | --preserve-dates ]
      [ -v | --verbose ]  [ -V | --version ]  [ --help ]
      objfile...

GNU strip discards all symbols from object files objfile. The list of object files may include archives. At least one object file must be given.

strip modifies the files named in its argument, rather than writing modified copies under different names.

-F bfdname
--target=bfdname
Treat the original objfile as a file with the object code format bfdname, and rewrite it in the same format. See section Target Selection, for more information.
--help
Show a summary of the options to strip and exit.
-I bfdname
--input-target=bfdname
Treat the original objfile as a file with the object code format bfdname. See section Target Selection, for more information.
-O bfdname
--output-target=bfdname
Replace objfile with a file in the output format bfdname. See section Target Selection, for more information.
-R sectionname
--remove-section=sectionname
Remove any section named sectionname from the output file. This option may be given more than once. Note that using this option inappropriately may make the output file unusable.
-s
--strip-all
Remove all symbols.
-g
-S
--strip-debug
Remove debugging symbols only.
--strip-unneeded
Remove all symbols that are not needed for relocation processing.
-K symbolname
--keep-symbol=symbolname
Keep only symbol symbolname from the source file. This option may be given more than once.
-N symbolname
--strip-symbol=symbolname
Remove symbol symbolname from the source file. This option may be given more than once, and may be combined with strip options other than -K.
-o file
Put the stripped output in file, rather than replacing the existing file. When this argument is used, only one objfile argument may be specified.
-p
--preserve-dates
Preserve the access and modification dates of the file.
-x
--discard-all
Remove non-global symbols.
-X
--discard-locals
Remove compiler-generated local symbols. (These usually start with `L' or `.'.)
-V
--version
Show the version number for strip.
-v
--verbose
Verbose output: list all object files modified. In the case of archives, `strip -v' lists all members of the archive.

c++filt

c++filt [ -_ | --strip-underscores ]
	[ -n | --no-strip-underscores ]
        [ -s format | --format=format ]
        [ --help ]  [ --version ]  [ symbol... ]

The C++ language provides function overloading, which means that you can write many functions with the same name (providing each takes parameters of different types). All C++ function names are encoded into a low-level assembly label (this process is known as mangling). The c++filt program does the inverse mapping: it decodes (demangles) low-level names into user-level names so that the linker can keep these overloaded functions from clashing.

Every alphanumeric word (consisting of letters, digits, underscores, dollars, or periods) seen in the input is a potential label. If the label decodes into a C++ name, the C++ name replaces the low-level name in the output.

You can use c++filt to decipher individual symbols:

c++filt symbol

If no symbol arguments are given, c++filt reads symbol names from the standard input and writes the demangled names to the standard output. All results are printed on the standard output.

-_
--strip-underscores
On some systems, both the C and C++ compilers put an underscore in front of every name. For example, the C name foo gets the low-level name _foo. This option removes the initial underscore. Whether c++filt removes the underscore by default is target dependent.
-n
--no-strip-underscores
Do not remove the initial underscore.
-s format
--format=format
GNU nm can decode three different methods of mangling, used by different C++ compilers. The argument to this option selects which method it uses:
gnu
the one used by the GNU compiler (the default method)
lucid
the one used by the Lucid compiler
arm
the one specified by the C++ Annotated Reference Manual
--help
Print a summary of the options to c++filt and exit.
--version
Print the version number of c++filt and exit.

Warning: c++filt is a new utility, and the details of its user interface are subject to change in future releases. In particular, a command-line option may be required in the the future to decode a name passed as an argument on the command line; in other words,

c++filt symbol

may in a future release become

c++filt option symbol

addr2line

addr2line [ -b bfdname | --target=bfdname ]
          [ -C | --demangle ]
          [ -e filename | --exe=filename ]
          [ -f | --functions ] [ -s | --basename ]
          [ -H | --help ] [ -V | --version ]
          [ addr addr ... ]

addr2line translates program addresses into file names and line numbers. Given an address and an executable, it uses the debugging information in the executable to figure out which file name and line number are associated with a given address.

The executable to use is specified with the -e option. The default is `a.out'.

addr2line has two modes of operation.

In the first, hexadecimal addresses are specified on the command line, and addr2line displays the file name and line number for each address.

In the second, addr2line reads hexadecimal addresses from standard input, and prints the file name and line number for each address on standard output. In this mode, addr2line may be used in a pipe to convert dynamically chosen addresses.

The format of the output is `FILENAME:LINENO'. The file name and line number for each address is printed on a separate line. If the -f option is used, then each `FILENAME:LINENO' line is preceded by a `FUNCTIONNAME' line which is the name of the function containing the address.

If the file name or function name can not be determined, addr2line will print two question marks in their place. If the line number can not be determined, addr2line will print 0.

The long and short forms of options, shown here as alternatives, are equivalent.

-b bfdname
--target=bfdname
Specify that the object-code format for the object files is bfdname.
-C
--demangle
Decode (demangle) low-level symbol names into user-level names. Besides removing any initial underscore prepended by the system, this makes C++ function names readable. See section c++filt, for more information on demangling.
-e filename
--exe=filename
Specify the name of the executable for which addresses should be translated. The default file is `a.out'.
-f
--functions
Display function names as well as file and line number information.
-s
--basenames
Display only the base of each file name.

nlmconv

nlmconv converts a relocatable object file into a NetWare Loadable Module.

Warning: nlmconv is not always built as part of the binary utilities, since it is only useful for NLM targets.

nlmconv [ -I bfdname | --input-target=bfdname ]
        [ -O bfdname | --output-target=bfdname ]
        [ -T headerfile | --header-file=headerfile ]
        [ -d | --debug]  [ -l linker | --linker=linker ]
        [ -h | --help ]  [ -V | --version ]
        infile outfile

nlmconv converts the relocatable `i386' object file infile into the NetWare Loadable Module outfile, optionally reading headerfile for NLM header information. For instructions on writing the NLM command file language used in header files, see the `linkers' section, `NLMLINK' in particular, of the NLM Development and Tools Overview, which is part of the NLM Software Developer's Kit ("NLM SDK"), available from Novell, Inc. nlmconv uses the GNU Binary File Descriptor library to read infile; see section `BFD' in Using LD, for more information.

nlmconv can perform a link step. In other words, you can list more than one object file for input if you list them in the definitions file (rather than simply specifying one input file on the command line). In this case, nlmconv calls the linker for you.

-I bfdname
--input-target=bfdname
Object format of the input file. nlmconv can usually determine the format of a given file (so no default is necessary). See section Target Selection, for more information.
-O bfdname
--output-target=bfdname
Object format of the output file. nlmconv infers the output format based on the input format, e.g. for a `i386' input file the output format is `nlm32-i386'. See section Target Selection, for more information.
-T headerfile
--header-file=headerfile
Reads headerfile for NLM header information. For instructions on writing the NLM command file language used in header files, see see the `linkers' section, of the NLM Development and Tools Overview, which is part of the NLM Software Developer's Kit, available from Novell, Inc.
-d
--debug
Displays (on standard error) the linker command line used by nlmconv.
-l linker
--linker=linker
Use linker for any linking. linker can be an abosolute or a relative pathname.
-h
--help
Prints a usage summary.
-V
--version
Prints the version number for nlmconv.

Selecting the target system

You can specify three aspects of the target system to the GNU binary file utilities, each in several ways:

In the following summaries, the lists of ways to specify values are in order of decreasing precedence. The ways listed first override those listed later.

The commands to list valid values only list the values for which the programs you are running were configured. If they were configured with `--enable-targets=all', the commands list most of the available values, but a few are left out; not all targets can be configured in at once because some of them can only be configured native (on hosts with the same type as the target system).

Target Selection

A target is an object file format. A given target may be supported for multiple architectures (see section Architecture selection). A target selection may also have variations for different operating systems or architectures.

The command to list valid target values is `objdump -i' (the first column of output contains the relevant information).

Some sample values are: `a.out-hp300bsd', `ecoff-littlemips', `a.out-sunos-big'.

You can also specify a target using a configuration triplet. This is the same sort of name that is passed to configure to specify a target. When you use a configuration triplet as an argument, it must be fully canonicalized. You can see the canonical version of a triplet by running the shell script `config.sub' which is included with the sources.

Some sample configuration triplets are: `m68k-hp-bsd', `mips-dec-ultrix', `sparc-sun-sunos'.

objdump Target

Ways to specify:

  1. command line option: `-b' or `--target'
  2. environment variable GNUTARGET
  3. deduced from the input file

objcopy and strip Input Target

Ways to specify:

  1. command line options: `-I' or `--input-target', or `-F' or `--target'
  2. environment variable GNUTARGET
  3. deduced from the input file

objcopy and strip Output Target

Ways to specify:

  1. command line options: `-O' or `--output-target', or `-F' or `--target'
  2. the input target (see "objcopy and strip Input Target" above)
  3. environment variable GNUTARGET
  4. deduced from the input file

nm, size, and strings Target

Ways to specify:

  1. command line option: `--target'
  2. environment variable GNUTARGET
  3. deduced from the input file

Linker Input Target

Ways to specify:

  1. command line option: `-b' or `--format' (see section `Options' in Using LD)
  2. script command TARGET (see section `Option Commands' in Using LD)
  3. environment variable GNUTARGET (see section `Environment' in Using LD)
  4. the default target of the selected linker emulation (see section Linker emulation selection)

Linker Output Target

Ways to specify:

  1. command line option: `-oformat' (see section `Options' in Using LD)
  2. script command OUTPUT_FORMAT (see section `Option Commands' in Using LD)
  3. the linker input target (see "Linker Input Target" above)

Architecture selection

An architecture is a type of CPU on which an object file is to run. Its name may contain a colon, separating the name of the processor family from the name of the particular CPU.

The command to list valid architecture values is `objdump -i' (the second column contains the relevant information).

Sample values: `m68k:68020', `mips:3000', `sparc'.

objdump Architecture

Ways to specify:

  1. command line option: `-m' or `--architecture'
  2. deduced from the input file

objcopy, nm, size, strings Architecture

Ways to specify:

  1. deduced from the input file

Linker Input Architecture

Ways to specify:

  1. deduced from the input file

Linker Output Architecture

Ways to specify:

  1. script command OUTPUT_ARCH (see section `Option Commands' in Using LD)
  2. the default architecture from the linker output target (see section Target Selection)

Linker emulation selection

A linker emulation is a "personality" of the linker, which gives the linker default values for the other aspects of the target system. In particular, it consists of

The command to list valid linker emulation values is `ld -V'.

Sample values: `hp300bsd', `mipslit', `sun4'.

Ways to specify:

  1. command line option: `-m' (see section `Options' in Using LD)
  2. environment variable LDEMULATION
  3. compiled-in DEFAULT_EMULATION from `Makefile', which comes from EMUL in `config/target.mt'

Reporting Bugs

Your bug reports play an essential role in making the binary utilities reliable.

Reporting a bug may help you by bringing a solution to your problem, or it may not. But in any case the principal function of a bug report is to help the entire community by making the next version of the binary utilities work better. Bug reports are your contribution to their maintenance.

In order for a bug report to serve its purpose, you must include the information that enables us to fix the bug.

Have you found a bug?

If you are not sure whether you have found a bug, here are some guidelines:

How to report bugs

A number of companies and individuals offer support for GNU products. If you obtained the binary utilities from a support organization, we recommend you contact that organization first.

You can find contact information for many support companies and individuals in the file `etc/SERVICE' in the GNU Emacs distribution.

In any event, we also recommend that you send bug reports for the binary utilities to `bug-gnu-utils@prep.ai.mit.edu'.

The fundamental principle of reporting bugs usefully is this: report all the facts. If you are not sure whether to state a fact or leave it out, state it!

Often people omit facts because they think they know what causes the problem and assume that some details do not matter. Thus, you might assume that the name of a file you use in an example does not matter. Well, probably it does not, but one cannot be sure. Perhaps the bug is a stray memory reference which happens to fetch from the location where that pathname is stored in memory; perhaps, if the pathname were different, the contents of that location would fool the utility into doing the right thing despite the bug. Play it safe and give a specific, complete example. That is the easiest thing for you to do, and the most helpful.

Keep in mind that the purpose of a bug report is to enable us to fix the bug if it is new to us. Therefore, always write your bug reports on the assumption that the bug has not been reported previously.

Sometimes people give a few sketchy facts and ask, "Does this ring a bell?" Those bug reports are useless, and we urge everyone to refuse to respond to them except to chide the sender to report bugs properly.

To enable us to fix the bug, you should include all these things:

Here are some things that are not necessary:

Index

.

  • .stab
  • a

  • addr2line
  • address to file name and line number
  • all header information, object file
  • ar
  • ar compatibility
  • architecture
  • architectures available
  • archive contents
  • archive headers
  • archives
  • b

  • bug criteria
  • bug reports
  • bugs
  • bugs, reporting
  • c

  • c++filt
  • collections of files
  • compatibility, ar
  • contents of archive
  • crash
  • creating archives
  • d

  • dates in archive
  • debug symbols
  • debugging symbols
  • deleting from archive
  • demangling C++ symbols
  • demangling in nm
  • demangling in objdump, demangling in objdump
  • disassembling object code
  • disassembly architecture
  • disassembly endianness
  • disassembly, with source
  • discarding symbols
  • dynamic relocation entries, in object file
  • dynamic symbol table entries, printing
  • dynamic symbols
  • e

  • ELF object file format
  • endianness
  • error on valid input
  • external symbols, external symbols, external symbols
  • extract from archive
  • f

  • fatal signal
  • file name
  • h

  • header information, all
  • i

  • input file name
  • l

  • ld
  • libraries
  • linker
  • listings strings
  • m

  • machine instructions
  • moving in archive
  • MRI compatibility, ar
  • n

  • name duplication in archive
  • name length
  • nm
  • nm compatibility, nm compatibility
  • nm format, nm format
  • o

  • objdump
  • object code format, object code format, object code format, object code format, object code format
  • object file header
  • object file information
  • object file sections
  • object formats available
  • operations on archive
  • p

  • printing from archive
  • printing strings
  • q

  • quick append to archive
  • r

  • radix for section sizes
  • ranlib
  • relative placement in archive
  • relocation entries, in object file
  • removing symbols
  • repeated names in archive
  • replacement in archive
  • reporting bugs
  • s

  • scripts, ar
  • section addresses in objdump
  • section headers
  • section information
  • section sizes
  • sections, full contents
  • size
  • size display format
  • size number format
  • sorting symbols
  • source disassembly
  • source file name
  • source filenames for object files
  • stab
  • start-address
  • stop-address
  • strings
  • strings, printing
  • strip
  • symbol index, symbol index
  • symbol index, listing
  • symbol line numbers
  • symbol table entries, printing
  • symbols
  • symbols, discarding
  • u

  • undefined symbols, undefined symbols
  • Unix compatibility, ar
  • updating an archive
  • v

  • VMA in objdump
  • w

  • wide output, printing
  • writing archive index

  • This document was generated on 20 November 1997 using the texi2html translator version 1.51.